Plan your approach to Level 356
Configuration 1 · Targets, tray management, and time-saving decisions
Your collection plan
Level 356, Configuration 1 has a 1:30 time limit. Your targets are Throne Blue × 24; Chair Blue × 12; Desk Blue × 12. There are 120 objects on the board: 48 targets and 72 non-targets. Targets account for 40% of the starting objects.
Step-by-step clearing plan
1. Match your goal icons and 1:30 timer to Configuration 1 before using this plan. Track Throne Blue (24 objects), Chair Blue (12 objects), Desk Blue (12 objects). Compare the full preview for this configuration; object positions can differ.
2. Scan for three accessible objects of one exact target type. The largest workload is Throne Blue (24 objects); revisit it after each clear, while taking complete triples of other targets when available. Identify all three partners before opening a new set.
3. If a target is covered, look for a complete removable non-target triple. Common non-targets in this configuration include Throne Purple, Chair Purple, Chair Yellow. Clear a set only when it improves access or completes an existing tray pair. Rescan after the pile settles instead of assuming a fixed hidden position.
4. Check the tray after each triple. Finish pairs already started before adding unrelated types. If you cannot identify a third partner, stop opening new sets and compare shapes and color variants with the item icons above.
5. During the final part of the 1:30 limit, read the remaining target counters and narrow your search to those exact variants. Clear blockers only when needed to reach a remaining target; collecting every non-target is not the goal. This is a configuration-based decision plan, so adapt each choice to the visible board.
Which items to distinguish
Watch these target/non-target pairs: Throne Blue is a target; Throne Purple is not; Chair Blue is a target; Chair Purple is not; Chair Blue is a target; Chair Yellow is not; Desk Blue is a target; Desk Purple is not. They share a named item family. Compare their real icons before selecting a partly covered object; clearing the non-target version will not advance that target counter.
Where to focus your opening
You have 3 target types to track. Start with a complete exposed triple, then rescan the surface. Choose the type whose third match you can already identify, instead of opening unfinished sets across Throne Blue, Chair Blue, Desk Blue at the same time.
Non-targets make up 60% of this configuration (72 objects). When targets are obscured, look for finishable non-target triples that reveal them. Keep each removal purposeful: a single non-target occupies tray space without completing a set. The counts indicate a large distraction pool, but do not establish where any object is hidden.
How to use the time limit
The 48 target objects require 16 target triples. Dividing the 90-second limit by those triples gives 5.6 seconds per target triple if all time were spent on targets. This is a planning allowance, not a measured completion time; searching and clearing non-targets also use that same clock.
Use short scans rather than long searches for a preferred target. Complete visible sets, then narrow the next scan to types already waiting in your tray. As the clock runs down, use the remaining goal counters to decide which shapes still deserve attention.








