Plan your approach to Level 322
Configuration 1 · Targets, tray management, and time-saving decisions
Your collection plan
Level 322, Configuration 1 has a 2:30 time limit. Your targets are Controller White × 9; Robot Yellow × 6; Bell Purple × 6; Television Purple × 9; Headphone Purple × 6; Popsicle Flat Rainbow × 6. There are 171 objects on the board: 42 targets and 129 non-targets. Targets account for 25% of the starting objects.
Step-by-step clearing plan
1. Match your goal icons and 2:30 timer to Configuration 1 before using this plan. Track Controller White (9 objects), Television Purple (9 objects), Robot Yellow (6 objects), Bell Purple (6 objects), Headphone Purple (6 objects), Popsicle Flat Rainbow (6 objects). Compare the full preview for this configuration; object positions can differ.
2. Scan for three accessible objects of one exact target type. The largest workload is Controller White (9 objects); revisit it after each clear, while taking complete triples of other targets when available. Identify all three partners before opening a new set.
3. If a target is covered, look for a complete removable non-target triple. Common non-targets in this configuration include Television Red, Telephone Blue, Boat Orange. Clear a set only when it improves access or completes an existing tray pair. Rescan after the pile settles instead of assuming a fixed hidden position.
4. Check the tray after each triple. Finish pairs already started before adding unrelated types. If you cannot identify a third partner, stop opening new sets and compare shapes and color variants with the item icons above.
5. During the final part of the 2:30 limit, read the remaining target counters and narrow your search to those exact variants. Clear blockers only when needed to reach a remaining target; collecting every non-target is not the goal. This is a configuration-based decision plan, so adapt each choice to the visible board.
Which items to distinguish
Watch these target/non-target pairs: Controller White is a target; Controller Blue is not; Bell Purple is a target; Bell Pink is not; Bell Purple is a target; Bell Red is not; Television Purple is a target; Television Red is not. They share a named item family. Compare their real icons before selecting a partly covered object; clearing the non-target version will not advance that target counter.
Where to focus your opening
You have 6 target types to track. Start with a complete exposed triple, then rescan the surface. Choose the type whose third match you can already identify, instead of opening unfinished sets across Controller White, Robot Yellow, Bell Purple at the same time.
Non-targets make up 75% of this configuration (129 objects). When targets are obscured, look for finishable non-target triples that reveal them. Keep each removal purposeful: a single non-target occupies tray space without completing a set. The counts indicate a large distraction pool, but do not establish where any object is hidden.
How to use the time limit
The 42 target objects require 14 target triples. Dividing the 150-second limit by those triples gives 10.7 seconds per target triple if all time were spent on targets. This is a planning allowance, not a measured completion time; searching and clearing non-targets also use that same clock.
Use short scans rather than long searches for a preferred target. Complete visible sets, then narrow the next scan to types already waiting in your tray. As the clock runs down, use the remaining goal counters to decide which shapes still deserve attention.














